• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Found and bought

Share this page

In the picture above, I think the tyre stem tool is by the pump. That would be similar to the item shown on the posts above. The picture above does not have the straight rod for the spark plug tool. Here is the full list.
Wheel brace is the lug wrench.

Jack-lifting 2A5472
Spanner-ratchet type 2A5627
Pump-tyre 3H2274
Gun-grease 13H50
Brace-wheel 2A5620
Screwdriver and gauge-ignition 3H2648
Spanner-tyre valve 2H1683
Spanner-box-sparking plug 2A5379
Gauge-feeler-tappet and sparking plug 2A5419
Screwdriver 2H4614
Bag-tool 2A5412

Scott in CA

In the picture below (not mine), the lifting angles and the wheel cover irons are included, but where not part of the tool kit. If one wanted to be exact, one also got a spare fuse in the fuse holder and the owner's manual. Anything else?
 

Attachments

  • 23305.jpg
    23305.jpg
    10.8 KB · Views: 334
<span style="font-style: italic">Try these, no clue what I am looking for. Brass tyre valve tool belongs on a 60s Jaguar</span>

That's what I'm taking about. The photo is very similar to the Dunlop original.
 
The grease gun in the photo Scott posted is incorrect. The end of the plunger should have a round disc rather than a loop. The one shown is Tecalemit GC 3000. The correct one is Tecalemit GC 3020.
 
In my so-called nothing-else-to-do hunt, I found two jack ratchets, one for sale at 150 british pounds and another that the guy would not sell to me for $100. He was hanging onto to it like it was gold because he has only had two ratchets in his possession <span style="font-weight: bold">ever</span> in decades of Sprite buying and selling. Just as an aside, I hope you all know never to actually use the jack provided in the tool kit. Most likely the result will be a scratched door.
Cheers,
Scott in CA
 
What the heck is a brace-wheel is that a lug wrench?

Note I have the spark plug wrench bar and wrench is on the way. Also have to tool bag.

As shown: Jack, jack wrench, Sparkplug bar, screwdriver, lug wrench, dizzy tool, feeler guage, greese gun.

Took the pic on floor of my garage, After two years still looks preaty good.

Jacks came both black and red.
 

Attachments

  • 23310.jpg
    23310.jpg
    32.1 KB · Views: 311
"Try these, no clue what I am looking for. Brass tyre valve tool belongs on a 60s Jaguar

That's what I'm taking about. The photo is very similar to the Dunlop original."


Need a close up photo of an orginal so we can see what it really looks like, Maybe the brass one is it?
 
Spark plug wrench came today, Need to clean it up but it is good and solid. Intresting, has a bit of rubber inside to hold plug while installing.

Only thing left is a tyre valve tool. I see em new, but.
 
I recently bought one of those, and it was much more expensive. I now think I have all the tools, and will post a picture soon.
Scott in CA
 
Back
Top