These things are a little tricky.To remove first
disconnect the black plastic square louvre from the body..4
metal screws.Pull the louvre box off the boss( which has 2
set screws in it )..its just a friction fit. Slacken the 2
set screws and remove the boss. Remove the 2 nuts (
0.6inches ) from the end of the cable. The whole cable with
knob is now removed , by turning the outer cable to unscrew
it from the dash.There is a thin hex fitting on and part of
the cable behind the knob, which is 0.63inches wide, but you
would need a thin wrench( o.1 inch thick )to get at it. Its
easier just to spin the outer cable to get it out. The
rotating knob can NOT be removed from the cable AFAIK.