• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Follow-up on TR3 Master Cylinder Resevoir

Share this page

martx-5

martx-5

Yoda
Country flag
Offline
A few days back, I posted about the rubber seal in the TR3 resevoir. I made a new one, and have out it all back together, but I didn't make a notation about which section of the resevoir was for the clutch and which one was for the brakes. Intuition says that the smaller section should be for the clutch, but sometimes intuition leads to the wrong conclusion.

So, which section services which master??
 
The center bore is the clutch surrounded by the larger master reservoir.
 
The smaller is for the clutch. I did the same thing on my 3 It lasted about 7 years before it started leak. I went ahead and got a new resevoir.

Don
 
Back
Top