• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Fixings for liner assembly hood comparment -BJ7

Share this page

G

grimes6

Senior Member
Country flag
Offline
Hi all,
I am just about to upholster the rear liner assembly compartment on my BJ7 . This consists of a metal section fixed to a plywood panel. Can anyone tell me how the plywood is fixed to the metal panel - rivets ? Photos attached of item in question


attachment.php



Regards,
Greg
 

Attachments

  • bj7_shutplate.jpg
    bj7_shutplate.jpg
    25.1 KB · Views: 212
Greg, my memory isn't too good but looking at this pic makes me think they are rivets.
 

Attachments

  • DSCF2708.jpg
    DSCF2708.jpg
    63.6 KB · Views: 157
Greg, may I ask where you found these trim panels? I don't remember seeing them in the Moss catalog.

Griz
 
If someone wanted to make a pair, I'm pretty sure these dimensions would get you there.
 

Attachments

  • Copy of img242.jpg
    Copy of img242.jpg
    44.2 KB · Views: 139
Are we talking about the rear quarter internal panels here?

I bought rear quarter panels from AH Spares and they came as a one piece unit, screwed at the front into the B post and again at the rear into the projecting bracket.

:cheers:

Bob
 
Back
Top