Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I recently purchased a 79 MGB, and it is in the process of painting. The rubber bumpers looked good, but I have discovered a crack about 2" long on the left side both top and bottom in the area of the recess for the parking lights. This naturally runs front to back.
The car has suffered a bump on the left front, the crack could have come from that, or could have been progressively cracking over the years, or both?
What is the best way to mend the crack, and what adhesive to use prior to putting on the flexible body filler.
Should it be drilled at the end like a metal stress crack?
Thank you for any help you all can give me.....
The car has suffered a bump on the left front, the crack could have come from that, or could have been progressively cracking over the years, or both?
What is the best way to mend the crack, and what adhesive to use prior to putting on the flexible body filler.
Should it be drilled at the end like a metal stress crack?
Thank you for any help you all can give me.....
