• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Fitting the trunk floor pad & fuel tank cover

Share this page

Got_All_4

Got_All_4

Luke Skywalker
Offline
This may be a picky question however before I cut the board for the tank cover I need to know if the tank board sets on top of the trunk floor pad? Or does the pad butt up against the tank board?
 
I don't know if it's correct or not, but I installed the tank cover first, and then laid in the mat. I'm using the original style "Hardura" style mat and I didn't cut it, so it actually comes up the tank cover about an inch and a half.
 
Yep...board to the floor and mat up to it. That way you can pull the mat to shake it off.
 
Back
Top