• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Fitting Damper bushings Question

Share this page

sim

sim

Jedi Trainee
Country flag
Offline
DampBush.jpg
The old ones were in collars with a washer built on. The new ones will not fit onto the collars. So I guess the correct fitting should be to remove the collars add large washers on the out side and fit back into the top of the swivel pin.
holder. Ya on No?
Thanks
Sim
 
The collar that is butted up to the head of bolt must be removed. Install your bushings then and everything will fit as it should.

 
BlueMax said:
The collar that is butted up to the head of bolt must be removed. Install your bushings then and everything will fit as it should.
Click to expand...
Hi
Thanks should I use thin washers or just install the bushing and nut?
Sim
 
I fitted washers . Didn't like the idea of nothing to prevent catastrophe except plastic!
 
Back
Top