• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Experimentation

Share this page

JimLaney

JimLaney

Senior Member
Offline
I've never tried to restore steel wheels. So after reading some of the posts in the forums and visiting YouTube, I tried out three methods to cleanup rusted steel wheels. 1.) used aluminum oxide (70 grit) and just assembled HF blast cabinet on a portion of the wheel; 2.) used twisted wire brush and L-head grinder on another portion, and; 3.) used drill and light wire brush on a third portion. See Photos below.Nevermind...taking too long to load one each time and then crash.
 
Back
Top