exhaust manifold

[ramajon]

i'm in need of an exhaust manifold or header for a 100-6 twin carb 6-port engine...who are the likely sources...or if anyone has a used setup

 

[Dave Richards]

Hi, Ramajon, try the search feature at the bottom of this page. I used "exhaust manifold" and came up with this: https://www.britishmiles.com , I'm sure there are others. Good luck.

 

[ramajon]

ended up getting a header from dennis welch in england...525.00 delivered...what a deal..could only find used manifold in usa for 300.00...anyway after cracking the intake while tightening the last bolt...what a drag, but aluminum is easily welded...everything is AOK and so very quiet w/ the monza exhaust out the back...much more power too...now i'm trying to get rid of the little backfire i can here now

 

[DerekJ]

I also have Dennis Welch headers fitted to my 100-Six,as well as his side exhaust.

Be prepared for some cutting of the frame though. (This is not necessary on BJ8 frames)