• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Excessive Brake Dust?

Share this page

RJS

RJS

Jedi Warrior
Country flag
Offline
Any ideas?

Starting this year, the right front brakes on my TR4A appear to be throwing out way more brake dust than it used to. Like 3x more and this wire wheel is always black and in need of a wash.

The pads are about 10 years old with about 7,500 miles on them. I inspected and there is plenty of pad left. Nothing has changed that I am aware of.

Thought?

Bob
 
You can look into a different type of pad.
Green pads aren't the answer. They are advertised as not being as dirty. My wheels are filthy after a hundred miles. I'm glad Panasports are easy to clean.
 
If it's only on one side check it out you may have a stuck caliper.
 
could also be your rear brakes are not working and your fronts are working overtime. Pads like tires have a life, so they might be toast (chemically speaking).
R
 
Thanks. I'm willing to bet it is a stuck or frozen caliper and will look into that. Any idea if this would be a quick fix on the car or if I would be looking at a remove and rebuild?

If I understand caliper design correctly, isn't the caliper body designed to float and move as the opposing piston applies force?

Bob
 
RJS said:
If I understand caliper design correctly, isn't the caliper body designed to float and move as the opposing piston applies force?
Click to expand...
That's how most modern brake calipers work, with a single piston moved by fluid and the caliper body in turn moving as a "reaction" to that (kinda like how most Girling-style rear wheel cylinders work on Triumphs). But "our" calipers have two pistons, one on each side, and the caliper body is fixed.
 
RJS said:
Any ideas?

Starting this year, the right front brakes on my TR4A appear to be throwing out way more brake dust than it used to. Like 3x more and this wire wheel is always black and in need of a wash.

The pads are about 10 years old with about 7,500 miles on them. I inspected and there is plenty of pad left. Nothing has changed that I am aware of.

Thought?

Bob
Click to expand...

Bob, if the pads are only 10 years old they are made with new generation (non-asbestos) material. From what I have read, the new compounds are softer and wear a lot faster, thus more dust. I recall donkey's years ago, either MG Mitten or AMCO, selling dust shields for wire wheels. Don't know if they are still available.
 
RJS said:
Thanks. I'm willing to bet it is a stuck or frozen caliper and will look into that. Any idea if this would be a quick fix on the car or if I would be looking at a remove and rebuild?
Bob
Click to expand...

If it is a stuck piston in the caliper then it's not a huge job, an afternoon, maybe a weekend, you might need to take the caliper off to un-stick the piston. Also if it is a stuck piston you'll want to do a little diagnoses to see if you can determine why the piston got stuck in the first place. If it's because some moisture has been absorbed in the brake fluid and the piston or sleeve has got some rust on it you'll probably will want to get it re-sleeved.
 
Back
Top