• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Enrichener [choke] wire

Share this page

N

Novamonte

Senior Member
Country flag
Offline
I just replaced the wire to the enrichener (choke) on one of the carbs on my BT7 tricarb. After around half an hour of fiddling, trying to get the wire into the small hole in the wire nipple (without loosing the nipple) it struck me that the task is much simpler if you lift the lever on the carb to the upper position first. This may well be obvious to many of you, but if this post can help someone else to save the time and effort it is worth posting.
 
Hi and Thank You,

Over the years, I have enjoyed and greatly Benefited from the experiences and instruction from others and applaud your contribution.

Again, THANK YOU, all the best,
Ray(64BJ8P1)
 
Back
Top