Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I'm in the process of stripping my 59 BE for restoration. I'm ready to pull the 1098 engine and need some advice. Is it better to pull eng & tranny as a unit or individually. If just the engine, is there a trick to clear the front pully with the frame to exit the transmission pilot shaft? Looks like there is not much room for forward movement. Do I keep the transmission bolted in place if only removing the engine?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Engine Removal
- Thread starter ralph_s
- Start date
Share this page
Offline
check the bcf wiki, it's all there
<---------------------------------<
<---------------------------------<