Engine Rebuilding. I want to use some non-stock parts, but I am not trying to make it a go fast. Here are the pistons I want to use in the rebuild. I need rings and bearing and I hope I can find them. I pulled some rings off an old 87mm piston I have. The rings look like they could work if new, but they are used and have developed a ride on the outside edge so I not sure. I have sent emails to 2 ring suppliers and not heard back. I am probably not asking the correct question.
Does anyone know what thread pitch and diameter the oil gallery end plug that is missing on this engine is? Moss sells a part and suggests there are 4 plugs in the stick package? I do not understand what they mean and do not have one here. Any help, suggestions, or money will be greatly appreciated on this rebuild.
Does anyone know what thread pitch and diameter the oil gallery end plug that is missing on this engine is? Moss sells a part and suggests there are 4 plugs in the stick package? I do not understand what they mean and do not have one here. Any help, suggestions, or money will be greatly appreciated on this rebuild.