-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Engine almost in____Rivergate kit problem.
- Thread starter Bruce_B
- Start date
Share this page
kcbugeye1275
Jedi Knight
Offline
I found a new starter that didn't work and its adjustments didn't work either. The VB has the ability to be taken apart and turned til it fits.
John Kuzman
Jedi Trainee
Offline
Bruce -
I installed the same set up last winter and ran into the same situation. You need to re-orient the starter. It has an adjustable mounting plate. Just loosen the two allen head screws and rotate the entire starter assembly until everything clears the rails. I found it easier to install the engine and gearbox in the car, then install the starter. This way, you can more readily see which way the starter needs to be rotated.
I installed the same set up last winter and ran into the same situation. You need to re-orient the starter. It has an adjustable mounting plate. Just loosen the two allen head screws and rotate the entire starter assembly until everything clears the rails. I found it easier to install the engine and gearbox in the car, then install the starter. This way, you can more readily see which way the starter needs to be rotated.