• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Emergnecy Brake Cable Replacement BJ8

Share this page

J

Jeffsbj8

Senior Member
Country flag
Offline
Do I need to pull the transmission tunnel to replace emergency brake cable or is there an easier method? Thanks, jeff
 
Jeffsbj8 said:
Do I need to pull the transmission tunnel to replace emergency brake cable or is there an easier method? Thanks, jeff
Click to expand...

That will help a bit. But it can all be done form up under the car.
 
Looks to me it would be all but impossible to do it from under the car due to the frame being in the way . Have you done this job from under the car before, thanks for your post, Jeff
 
JEF:
My tunnel was off because I had just finished installing the tranny.
However on a later car I do remember fighting to in.stall one from underneath the car
 
Good info , I messed with it a little yesterday and seems like I can unbolt differential end of drive shaft and move it up out of the way and I believe I can get to it . thanks again. Will let you know .
 
Back
Top