Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hi all.
With the transmission out, I undertook a re-chrome of my emegency brake handle... which has come out wonderful!!!
I am reassembling the internal rod to the button that links to the pawl etc. In this case, I have forgotten where the washers are used and the Moss diagram is not complete. There were three small washers removed and one spring washer.
Can some one advise the correct assembly order for the washers/spring washer.
Do they all go onto the dowel on the brake handle and cotter-pinned into place? Does the rod-to-pawl connection receive a washer(s) or does it cotter-pin into place washerless?
Anyone have a nice photo.
Thanks!!!
- Andrew -
With the transmission out, I undertook a re-chrome of my emegency brake handle... which has come out wonderful!!!
I am reassembling the internal rod to the button that links to the pawl etc. In this case, I have forgotten where the washers are used and the Moss diagram is not complete. There were three small washers removed and one spring washer.
Can some one advise the correct assembly order for the washers/spring washer.
Do they all go onto the dowel on the brake handle and cotter-pinned into place? Does the rod-to-pawl connection receive a washer(s) or does it cotter-pin into place washerless?
Anyone have a nice photo.
Thanks!!!
- Andrew -
