Offline
Posting here instead of the Spridget board as the more input the better. I am confused. In the diagram below I have two wires and one dual female connector (Bullet connectors of course). (If you are interested, at the other end is the brake light switch - currently disconnected)
With the wires unplugged I get 12.10 V on one wire and 0 V on the other.
If I plug them in I get 6.06 V from the connector.
I can only presume this means that something is now connected in series but I just can't visualize it.
any thoughts? thanks all!
With the wires unplugged I get 12.10 V on one wire and 0 V on the other.
If I plug them in I get 6.06 V from the connector.
I can only presume this means that something is now connected in series but I just can't visualize it.
any thoughts? thanks all!