Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Today I removed the headlights and courtesy lights from my BN1 to prep for painting and was wondering if there was a way of restoring the connectors. Mine had the rubber insulators completely deteriated and some had hardened. I labelled each wire so that I could reassemble properly. I had the car on my new car hoist and it was a real treat to be able to raise it to a level that was easy to work on. I removed the bumpers trunk lid ( Canadian term LOL!), front fender( CDN term LOL!) spears. I scraped and degreased the front suspension all while watching B.J. on the tube and sitting down occasionally to sip some suds. Ah! life in northern Ontario Canada.
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
electrical connectors
- Thread starter rustynuts
- Start date
Share this page
anthony7777
Yoda
Offline
rustynuts,i just looked at the "moss" stuff,check it out,looks as if they have what you want. /ubbthreads/images/graemlins/cheers.gif
Offline
You can find all kinds of wire fittings here:
https://www.britishwiring.com/
or here:
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28931&SortOrder=30
D
https://www.britishwiring.com/
or here:
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28931&SortOrder=30
D
Randy Forbes
Yoda
Offline
[ QUOTE ]
Today I removed the headlights and courtesy lights from my BN1 to prep for painting and was wondering if there was a way of restoring the connectors. Mine had the rubber insulators completely deteriated and some had hardened. I labelled each wire so that I could reassemble properly. I had the car on my <u>new car hoist</u> and it was a real treat to be able to raise it to a level that was easy to work on. I removed the bumpers trunk lid ( Canadian term LOL!), front fender( CDN term LOL!) spears. I scraped and degreased the front suspension all while watching B.J. on the tube and sitting down occasionally to sip some suds. Ah! life in northern Ontario Canada.
[/ QUOTE ]
Must be going around, I got mine installed this past Sunday!
Today I removed the headlights and courtesy lights from my BN1 to prep for painting and was wondering if there was a way of restoring the connectors. Mine had the rubber insulators completely deteriated and some had hardened. I labelled each wire so that I could reassemble properly. I had the car on my <u>new car hoist</u> and it was a real treat to be able to raise it to a level that was easy to work on. I removed the bumpers trunk lid ( Canadian term LOL!), front fender( CDN term LOL!) spears. I scraped and degreased the front suspension all while watching B.J. on the tube and sitting down occasionally to sip some suds. Ah! life in northern Ontario Canada.
[/ QUOTE ]
Must be going around, I got mine installed this past Sunday!
anthony7777
Yoda
Offline
dave russell,thats just been added to my "favorite" list,thanks,anthony7777 /ubbthreads/images/graemlins/yesnod.gif