-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Elan ignition points
- Thread starter nevets
- Start date
Share this page
I have sometimes, and sometimes not. It is easer to remove it, so that is how I will do it next time. I have no Twink now, but it is the same deal with my Cortina with side drafts.
I take off the distributor cap, and mark the shaft with a felt pen, and the alignment of the rotor. Then watch how much the rotor moves when you pull the distributor.
It is real simple to get it back in in the same orientation.
P.
I take off the distributor cap, and mark the shaft with a felt pen, and the alignment of the rotor. Then watch how much the rotor moves when you pull the distributor.
It is real simple to get it back in in the same orientation.
P.
