• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

EBC GD208 Brake rotor

Share this page

J

jcsb

Jedi Trainee
Offline
I see where EBC makes a brake rotor for what they list as Austin Healey 3000 1961-1964. I have a 1960 3000 MK1 BN7. What changed? I don't see anything.
John
 
The later discs are 1/2" thick instead of 3/8". They are also shaped differently inside so you can't put a "BJ8" disc over an earlier bolt-on caliper bracket as they interfere by about 1/8". The later calipers bolt straight to the spindle so there is more room for strengthening material in the disc. Some websites don't get their year/model designations spot on.
 
Thanks, so this p/n is 1/2" thick? I looked on the manufacturers site but they give you nothing.
John
 
It's the early disc/rotor. It will fit your early 3000.
 
Back
Top