• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Eating fan belt

Share this page

TonyPanchot

TonyPanchot

Jedi Trainee
Offline
It would seem that the small black bits i noticed on the underside of bonnet was the belt
after inspection found quite a bit impacted on the new water pump
pulley.

used a laser to align

any thoughts or just a bad belt :wall:
 
Do you think the belt is too wide? There are some that are wider than the original and cause squeeling.
 
Sometimes just a small piece of crud or a rock or a chip can cause your problem. I once had a tr3 that would chew up belts like crazy and what it turned out to be was a small painted line/spot that someone put in to help highlight the little hole on the crank pulley. Once removed no more problem.
Steve
 
Sometimes just a small piece of crud or a rock or a chip can cause your problem. I once had a tr3 that would chew up belts like crazy and what it turned out to be was a small painted line/spot that someone put in to help highlight the little hole on the crank pulley. Once removed no more problem.
Steve
 
Thats an idea
I will spin up the upper 2 pulleys and hit with light sand paper
and fashion a dowel with a v wrapped sandpaper edge to hit the main
thinking 300 grit

Thanks guys for breaking the brain cell loose :smile:


Too warm down here brain must be suffering
 
Back
Top