• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR6 Early vs Late TR6 Interior Panel Differences?

Share this page

BobbyD

BobbyD

Jedi Knight
Offline
The obvious difference with interior panels over the years is the cosmetic design and the door pull, or lack off. Other then that, are all the hole locations the same i.e. window & door handle, mounting clips and general outline shape and dimensions? Same question for all the other interior panels?

Thanks......
 
The drivers door on my '72 is from a '74. Long story. The only difference is the side impact bar in the later door. Door handle, window crank etc... are all the same. Used '72 door cards on the later door with no fitting issues either.
 
Thanks guys........ I just looked at the Moss catalog and the door shell part numbers are the same for the TR250 through all of the TR6s. Based on that I "assume" the door's interior panels are the same with regard to size and clip mounting hole location. The only difference being the upholstery pattern and the interior door pull location.

Just checked the TRF Green Book and they show 3 different Door Shell part numbers :wall:
 
Back
Top