• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Early TR3 - replace turn signal light in dash

Share this page

jfarris

jfarris

Jedi Trainee
Country flag
Offline
What is the easiest route to change this bulb in an early TR3. I looked for a trail of blood from when I switched it to LED and found nothing.
Thanks in advance!
 
The one between the panel light switch and the fuel gauge.
 
Roger that Bob, I’m looking for the best route to the back of that cylinder. I took the tach out, no go. Can’t get through between gauges and glove box. It appears I need to remove glove box - yuk!
 
Gotcha. May be best to take off the wing nuts that hold the panel in. Maybe the glove box is in the way to get to the right side nuts. Been a long time.
Bob
 
I moved the glove box just enough to get my hand back there, all is well now.
Thanks to all!
 
Back
Top