Wanted Early BN1 Right Hand Sidescreen

[bruceg]

I have a left and would love to have a pair.

 

[BMCinMS]

The Perspex type or the one with the flap?

 

[bruceg]

The Perspex type

 

[BigGreen]

They look like this

 

[emgeetf]

I have a pair that needs work

 

[bruceg]

Yes, I am looking for the early BN1 one piece fixed Perspex (not sliding and not the vinyl type). If you have one or more available please sent photos and price including shipping to zip code 48843.

b gear ns @yahoo

Thanks,
Bruce

 

[emgeetf]

i just posted an ad on craigslist minneapolis with photos. check them out if you are interested > Austin Healey 100/4 plexiglass side curtains - auto parts - by owner - vehicle automotive sale - craigslist <

 

[emgeetf]

here is the link > Austin Healey 100/4 plexiglass side curtains - auto parts - by owner - vehicle automotive sale - craigslist <

 

[emgeetf]

will not allow me to add the link to the ad

 

[BigGreen]

That is a DIY version ;-)
See the picture above for the original

 

[bruceg]

i just posted an ad on craigslist minneapolis with photos. check them out if you are interested > Austin Healey 100/4 plexiglass side curtains - auto parts - by owner - vehicle automotive sale - craigslist <

These are some homemade sidescreens. Someone has taken the frames from the vinyl sidescreens and covered them with a single flat piece of Perspex (plexiglass). The early type that I am looking for is curved and only has framing on the bottom and the front edge, nothing on the top or rear edge. Scroll up to see a photo.

 

[emgeetf]

you are quite wrong in your assumption on these side screens. They are curved and professionally manufactured and not put together by a back yard mechanic. The frame has the correct bend to follow the shape of the car in the front. They also have locks in the front so that when you are driving they will not fly off when wind hits the screen. your screens are also after market screens just like the ones i have. i also have a pair of original 100/4 screens that were in my car but they are a2 piece factory originals with a flap underneath. good luck in your search. may be you might find a pair eventually.

 

[BigGreen]

History at its best

 

[bruceg]

See the posted article with a photo osf the s

you are quite wrong in your assumption on these side screens. They are curved and professionally manufactured and not put together by a back yard mechanic. The frame has the correct bend to follow the shape of the car in the front. They also have locks in the front so that when you are driving they will not fly off when wind hits the screen. your screens are also after market screens just like the ones i have. i also have a pair of original 100/4 screens that were in my car but they are a2 piece factory originals with a flap underneath. good luck in your search. may be you might find a pair eventually

See the article above posted by Big Green with a photo of the sidescreens I am looking for. They were suppliedby the factory only on very early cars (as documented in the Concour Standards) and as seen the the photo. They are not after market, and are very rare.