-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Early BN1 front stub axle castellated nut
- Thread starter zblu
- Start date
Share this page
Offline
BN1 will be a BSF.
There are plenty of Australian suppliers of BSF fasteners - Google "bsf fasteners australia". See for instance: https://www.classicfasteners.com.au/slotted/
Moss has pictures of slotted vs castllated nuts. See: https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=44740
BSF means British Standard Fine. See these charts and scroll down to the BSF chart: https://mdmetric.com/tech/thddat8.htm
Note that the 7/16" diameter is 18 threads per inch. Just measure the OD of the stub threads with a caliper and order the correct nut.
There are plenty of Australian suppliers of BSF fasteners - Google "bsf fasteners australia". See for instance: https://www.classicfasteners.com.au/slotted/
Moss has pictures of slotted vs castllated nuts. See: https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=44740
BSF means British Standard Fine. See these charts and scroll down to the BSF chart: https://mdmetric.com/tech/thddat8.htm
Note that the 7/16" diameter is 18 threads per inch. Just measure the OD of the stub threads with a caliper and order the correct nut.
