• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR6 Dumb question

Share this page

D

davjac889

Jedi Hopeful
Offline
How in the heck do you separate the blower knob
from the switch to remove it?
I have no idea, I loosened the chrome piece that
holds it on the faceplate but now what?
Thanks
Bill '73 TR6
 
Most of those knobs that you have to push or pull have a small hole in the round section. The metal shaft of the switch has a spring loaded plunger that goes into that hole when everything is aligned.
If you can find that hole, you can usually use an end of something like a paper clip to depress the spring loaded plunger with one hand and pull the knob straight back and off with the other hand.
 
Back
Top