• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Dumb location for clutch pipe stress relief coil

ncbugeye

Jedi Warrior
Offline
Could some Bugeye owners with original clutch pipework check for me if you have the same bad choice by the hydraulics guy in the factory...

The coil of pipe to relieve the stress where the clutch pipe transfers from the tub to the engine is located exactly next to the distributor cap in such a way as to make it unbelievably difficult to remove said cap. See attached picture. I do not think he could have placed the coil in a more inopportune location if he had tried.

Perhaps he was just having a bad day and wanted to make his mark.
 

Attachments

  • 296448-IMG_5337640.jpg
    296448-IMG_5337640.jpg
    171.2 KB · Views: 130
Actually it belongs about half way between the dizzy cap and the starter switch in that clear spot.
 
Chris, when the plumbing was installed, there was no engine in the car, so it didn't make any difference.
Buck up, Matey, and deal with it. After all, once you deal with the tach drive, it's no big hoo-hoo to move some tubing, right?
Jeff
 
Back
Top