Driving Lights [picture posting opportunity!]

[vette]

I know the spacers are a well known practice but I wonder what that does to the camber.

 

[vette]

Hmm, don't ya think bringing that coil spring down a tech or so isn't moving the offset of that upper trunion a wee bit.

 

[RAC68]

John,

Thanks for your reply. Vette has started a new thread on the lowering of the front end so I will move my comments to his thread so we don't divert from the Driving Lights discussion.


Thanks,
Ray(64BJ8P1)

 

[Guy Marshall]

Here's my 100/6 with the Rawles mounts. They are quite... chunky, but I like them! The lights are cheap spots from Deamon Tweeks.

 

[maxwedge5281]

I was able to locate and purchase a reasonably priced pair of marchal 889 fog/driving lights that are approximately 7 inches in diameter. they appear to be in very good condition and are stainless steel bodies. now to decide on a mount for them. I prefer to have them mounted sort of between the turn signal/parking lights and the lower edge of the grill. most likely will need to make the mounts! thanks for the pictures and suggestions.

 

[maxwedge5281]

Marchal 889 lights that are a combination of fog and driving lights....not sure what that means but hope to have these wired up in a couple of days....thanks for all the pics and thoughts!