-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
drill bits
- Thread starter rossco
- Start date
Share this page
Legal Bill
Jedi Knight
Offline
The Sears Crafstman bits work well for me
Keoke
Great Pumpkin
Offline
Anyone have a source for some hardened bits that are machine shop quality?
Cobalt drill bits are the best. ... Carbon steel can form a sharp edge and can be made hard. It is an excellent choice provided you use a low drill speed when drilling hard steel.
Generally low speeds work best when drilling in metal.--Fwiw--Keoke
Cobalt drill bits are the best. ... Carbon steel can form a sharp edge and can be made hard. It is an excellent choice provided you use a low drill speed when drilling hard steel.
Generally low speeds work best when drilling in metal.--Fwiw--Keoke
Bob_Spidell
Yoda
Offline
I've been using these with good results for the minor fab work I do:
https://www.harborfreight.com/3-piece-titanium-nitride-coated-high-speed-steel-step-drills-91616.html
https://www.harborfreight.com/3-piece-titanium-nitride-coated-high-speed-steel-step-drills-91616.html
Superwrench
Jedi Trainee
Offline
Dewalt has bits that have a small starter tip on them that keeps them from walking and work great on drilling out spot welds. Lowes and Home Depot have them.
John_Progess
Jedi Warrior
Offline
Check out MSC.com. MSC is a industrial tool company. Have a good day!
John
John
Cottontop
Jedi Warrior
Offline
Few things aggrivate me more than a dull drill bit! :madder:
I kept buying new ones to replace the dull ones. I ended up with a cigar box full of DULL drill bits of all sizes and lengths.
A couple of years ago, I bought a Drill Doctor DD500 on sale. Over the span of a couple of evenings, I sharpened ALL of my drill bits. Even at the $100 sale price, it was a WHOLE LOT cheeper than replacing all of those bits AGAIN....
This machine is FANTASTIC!!! With its diamond sharpening "stone", it will sharpen normal 118o points and more shallow 135o points as well as masonry drills. It will also create and sharpen split points which resist "walking" when starting.
Now I after a couple of usages, I throw the dull bit into a box and sharpen all of them when I get a handful. NO more dull drill bits for me.
I don't make any money from Drill Dr., but this drill sharpener is one of the most valuable tools I have.
Tim
I kept buying new ones to replace the dull ones. I ended up with a cigar box full of DULL drill bits of all sizes and lengths.
A couple of years ago, I bought a Drill Doctor DD500 on sale. Over the span of a couple of evenings, I sharpened ALL of my drill bits. Even at the $100 sale price, it was a WHOLE LOT cheeper than replacing all of those bits AGAIN....
This machine is FANTASTIC!!! With its diamond sharpening "stone", it will sharpen normal 118o points and more shallow 135o points as well as masonry drills. It will also create and sharpen split points which resist "walking" when starting.
Now I after a couple of usages, I throw the dull bit into a box and sharpen all of them when I get a handful. NO more dull drill bits for me.
I don't make any money from Drill Dr., but this drill sharpener is one of the most valuable tools I have.
Tim