• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Drainage hoses, best route.

Share this page

Simon TR4a

Simon TR4a

Jedi Knight
Offline
On my old TR6 I lengthened these and ran them out through the splash panels behind the front wheels.
On my TR4a resoration I am planning to paint inside the wheel wells body colour not black undercoating so they weould be a bit visible.
Has anyone any beter suggestions?
Thanks, Simon.
 
Yes, drill a hole in the top of the rocker panel bulkhead which is directly below the drain line hanging above. Add a longer piece of drain line and feed it thru this hole and out a similar hole in the bottom side of the rocker panel and beneath the car. Grommets can be fitted to prevent chaffing and all is hidden from view.
 
Back
Top