Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am in the late stage of restoring a 54TR-2 Long Door. The brake system is all new, master cylinder, wheel cylinders, clutch slave cylinder. The steel lines were good, flushed good before re-installing. I have heard the pro's and con's of using DOT 5. Any suggestions, guys?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR2/3/3A Dot 5
- Thread starter Redoakboo
- Start date
Share this page
Should go with DOT5. With all new braking system, one of the "cons" is eliminated as there is little to no chance of mixing fluids. DOT5 does better for vehicles stored for periods of time, and of course won't melt paint. I have had it in my Doretti and TR2 for years and no problems, both have firm pedals. Let the debate begin!
Dan
Dan
Online
After I saw the mess that occurred over the years in the paint beneath the reservoir, I went with DOT 5!
Before:
View attachment 62977
and after:
View attachment 62978
Attachments
Offline
I've been using DOT5 in my TR3 for 5 or 6 years. I have seen no "cons". The main "con" of DOT3 is that a paint sprayer is hard to get into the engine box when the fluid damages your paint, which it surely eventually will.
Bob
Bob
Offline
I've had DOT5 in my bugeye for about 30 years and still good (maybe time for a bleed and refill while I've got some spare time) Great stuff. Only disadvantage is a slightly spongier brake pedal than DOT 3 or 4, but nothing ridiculous.
TR3driver
Great Pumpkin - R.I.P
Offline
FWIW, you can partially compensate for the soft pedal by converting to the braided stainless brake hoses. They swell less under pressure than the originals.
I've lost track of just how long I've been using DOT 5, got to be around 35 years. I really like it and recommend it; unless you want to be absolutely original and have brake problems every year. That's one part of the "Triumph experience" that I'm glad to miss out on!
I've lost track of just how long I've been using DOT 5, got to be around 35 years. I really like it and recommend it; unless you want to be absolutely original and have brake problems every year. That's one part of the "Triumph experience" that I'm glad to miss out on!
Offline
I have posted this before, I have used DOT 5 for years, and have fewer leaks in the hydraulics, which used to be a more regular occurrence. No problem with mushy pedal or blessing. However after about 8 years I had a brake master cylinder fail. It wasn't the rubber, when I took it apart there was a line of corrosion straight down the bottoms of the bore.
DOT5 doesn't absorb water, it sinks to the bottom of the mix. My fault for not flushing often enough, and I still use it, but in my mind that is the real issue with DOT5.
DOT5 doesn't absorb water, it sinks to the bottom of the mix. My fault for not flushing often enough, and I still use it, but in my mind that is the real issue with DOT5.