HAN8L1965
Jedi Warrior
Offline
Has anyone recently put a door window in an early model. Either I am brain dead or this is just plain crazy. For anyone else doing this job. the quarter light goes in after the window goes in, how do I know, well I have removed it 3 times so far. I can't get the guide wheel in the center of the glass rail to get in the channel and engage. Everything I read says to bring up the winder rail mechasism until the end is to the farthest point to the rear of the door. Great for the rear roller but the middle roller never seems to be aligned with the slot. This has been an all day process with no quality end results. Also you need to put the top inside door trim in before you do anything. I started from painted metal.
Mark
Mark