-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Door striker plate
- Thread starter fogdot
- Start date
Share this page
T
TRDejaVu
Guest
Guest
Offline
Not knowing which car you are referring to, I can only say that the TR4 has captive threaded plates. It's doubtful if you have loose nuts, because how would you hold them to tighten?
martx-5
Yoda
Offline
If you are talking about the striker plate on the 'B' pillar, then yes, you will lose all of the nuts if you take the screws out. /bcforum/images/%%GRAEMLIN_URL%%/jester.gif
Seriously, there is a floating captive plate back there that is threaded for all four screws. Therefore, all four move together. You can take the striker plate off without running into any problems.
Seriously, there is a floating captive plate back there that is threaded for all four screws. Therefore, all four move together. You can take the striker plate off without running into any problems.