• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Door Panel Removal?

Share this page

W

Wausau 911

Member
Offline
'63 BJ7 - drivers door rattles up near vent window when the window is up. Yrs. ago it had the vinyl panel off and recall there is a pin in the window crank. Can't for the life of me get to it anymore.
Any tricks to accomplish this so I can get to inner door?
By the way this is my first post on this forum. Replies appreciated.
 
There is a roll pin in the window winder. To get to it, you'll need to insert the tool you're going to use to drive out the pin (small punch or even a nail) between the door card and the plastic trim escutcheon and press the door card towards the outside of the car. This will give you just enough room to drive out the pin.

Welcome to the forum!
 
Back
Top