Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have a 1963 Austin Healey BJ7 that was repainted and went into storage immediately after that. It stayed in storage about 15 years and now I am trying to put the car back together, but cannot seem to find some of the parts that were taken off during the paint job. One such part I cannot find is the door closure hardware on both sides. I am missing the hardware that goes to the body side of the shut pillar and would appreciate if anyone who has a BJ7 can send me some photos of what hardware mounts on the body side to make the door close. The photo I am attaching is from the passenger side of my BJ7 showing the door hardware and there are 3 holes on the body side, but what hardware goes in to the 3 holes? Parts diagrams don't show these parts from a BJ7.
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Door Latch Hardware
- Thread starter emgeetf
- Start date
Share this page
Bob_Spidell
Yoda
Offline
You're missing the striker plates and some packing and screws; items# 80 and 82. Not sure what the large hole is for.
twas_brillig
Jedi Knight
Offline
Dunno if this helps. Our BJ7 is still cowering within its Car Capsule (which is also still anchored down by ice). I probably won't be pulling it out for a month. I expect taht Mr. Spidell's reference provides all the answers. Doug