• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

door alignment on a BJ8

bighealeysource

Luke Skywalker
Country flag
Offline
Hey all,
Can the doors be adjusted to allow for a better alignment
of the door to the front fender ? On my BJ8 the gap
is tight on the right side and the skin of the door is
not flush with the fender skin when closed - probably off
by an 1/8th inch. This car has never had the fenders off
as far as I know. Can you shim the hinges or something
like that to make up for the slight variance ?
Thanks,
Mike
 
Hi Mike,

Yes the gap between the back of the fender and the front edge of the door can be altered by making shims and placing them behind the hinge to move the door back. Similarly, if the 1/8" off set is only due to improperly hanging the door. there is sufficient adjustment existing in the hinge plate to bring the two into alignment Pack a lunch and get a helper--Regards-- :smile: Keoke
 
Back
Top