Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
AUSMHLY
Yoda
Offline
Hi guys,
My BJ8 window rattles when in the settled down position.
I found a quick and easy fix to silence it.
The window frame has 3 nylon guides. 2 slide in the vent window track and the other slides in the track at the door edge.
I squeezed the bottom of the window track, at the edge of the door, a little to take out the play that the nylon guide has. I did that only at the place where the nylon stops when in the down position.
There's still play in the rest of the window track for the nylon guide when it's moving in the track, but none when in the bottom resting position. Now the glass does not vibrate and make noise when in the down position.
The top of the door has the outer rubber strip and the inner felt strip pressing against the glass at the top.
I wish all the fixes were this easy.
Here's a photo of the track area I made tighter around the guide.
Cheers,
Roger
My BJ8 window rattles when in the settled down position.
I found a quick and easy fix to silence it.
The window frame has 3 nylon guides. 2 slide in the vent window track and the other slides in the track at the door edge.
I squeezed the bottom of the window track, at the edge of the door, a little to take out the play that the nylon guide has. I did that only at the place where the nylon stops when in the down position.
There's still play in the rest of the window track for the nylon guide when it's moving in the track, but none when in the bottom resting position. Now the glass does not vibrate and make noise when in the down position.
The top of the door has the outer rubber strip and the inner felt strip pressing against the glass at the top.
I wish all the fixes were this easy.
Here's a photo of the track area I made tighter around the guide.
Cheers,
Roger
