Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Shadbolt cams in Vancouver can regrind my BJ8 cam to the following spec for 200.00:
The touring grind goes by the identifying number of M-462 it is 220 degrees @ .050 " 270 degrees advertised cam lift is .265" valve lift is .397" gross with 108 degrees of lobe separation. The stock cam is 252 degrees.
So the same lift as stock but a fair bit more duration and a little "hotter" than the Welsh DWR-1:
Sound like a reasonable street cam on a stockish engine with minor head work and lightened flywheel?
The touring grind goes by the identifying number of M-462 it is 220 degrees @ .050 " 270 degrees advertised cam lift is .265" valve lift is .397" gross with 108 degrees of lobe separation. The stock cam is 252 degrees.
So the same lift as stock but a fair bit more duration and a little "hotter" than the Welsh DWR-1:
Sound like a reasonable street cam on a stockish engine with minor head work and lightened flywheel?
Last edited: