• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Dissassemble TR 3A emergency brake handle.

Share this page

J

John_Progess

Jedi Warrior
Country flag
Offline
Trying to get push rod out of handle to get handle ready for chrome. Do I remove the pawl from the rod and pull the rod out the top of the handle? The handle was removed from the car by the PO. Thanks for your help.
 
My recollection is that I took everything out the bottom of the handle.
Charley
 
I just did mine last month, so you'd think I'd remember. I dont, though!?! Seems like you jiggle the lock pawl off at the bottom, then shove the rod up as high as you can to remove the pushbutton. Once that is done the rod comes out the bottom, it has a curve, so I know it will not pull out the top.

Sorry I don't remember better...just remember it takes a lot of jiggling.:.LOL...
 
CJD said:
Sorry I don't remember better...just remember it takes a lot of jiggling.:.LOL...
Click to expand...

"Keep jiggling, Peggy, keep jiggling!”

Scott
 
I broke that very thick wire taking mine apart. That is going to be fun to duplicate! I did take some pictures as I was taking it apart. I just have to find them. I had the handle re-chromed, and it came out looking nice. Jerry
 
Back
Top