-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 dimmer
- Thread starter ferrdlee
- Start date
Share this page
Online
I just did the very same job yesterday. See here:
www.britishcarforum.com
TR6 - Rheostat bypass
Today's the day.... For quite some time I've been wanting to bypass my "touchy" rheostat. I've been dreading the job but it's done now. I removed the ashtray in the center of the dash as well as the speaker panel on the right side. With a little finesse I was able to remove all three wires that...
www.britishcarforum.com
texbears3
Freshman Member
Offline
If your willing to take the rheostat out, it can be cleaned and function like new.
Typically the grease used in the windings become hard, and does not allow the wiper to make contact.
Once the rheostat is out you will need to pry the tongs open that hold it together. Clean old grease off with alcohol or other solvent. Re-grease and reassemble. Should work like new.
Typically the grease used in the windings become hard, and does not allow the wiper to make contact.
Once the rheostat is out you will need to pry the tongs open that hold it together. Clean old grease off with alcohol or other solvent. Re-grease and reassemble. Should work like new.