• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Differential side hub measurement

Share this page

Got_All_4

Got_All_4

Luke Skywalker
Country flag
Offline
Disassembling my differential and one of the side hubs is cracked and the other the seal bearing surface was gouged from the seal. Turned it down in my lathe to a smooth surface and got it to 1.620". does anyone know the tolerances for that surface?
 

Attachments

  • 20200627_113204.jpg
    20200627_113204.jpg
    56.8 KB · Views: 145
Try Googling "seal tolerance". It look like .003"+/- for a shaft in that size range. Speedy sleeve might be an option.
Berry
 
Last edited:
Back
Top