• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Diff drain plug sealant?

V

vagt6

Guest
Guest
Offline
My diff weeps a bit of oil, and the Haynes Manual says to apply a bit of "sealant" to the plug when it's replaced.

What's a good sealant for such a plug???

Also, my diff drain plug does not go anywhere near flust with the differential casing, it sticks out about 1/3 or so of the threads can be seen protruding. I removed it, cleaned the threads carefully and torqued in back in. Is this normal? :confuse:
 
vagt6 said:
My diff weeps a bit of oil, and the Haynes Manual says to apply a bit of "sealant" to the plug when it's replaced.

What's a good sealant for such a plug???

Teflon tape?
vagt6 said:
Also, my diff drain plug does not go anywhere near flust with the differential casing, it sticks out about 1/3 or so of the threads can be seen protruding. I removed it, cleaned the threads carefully and torqued in back in. Is this normal? :confuse:

It is like that on mine

mark
 
ya my drain plug sticks out a bit as well, which is normal for "tapered" pipe fittings I guess, I have found the liquid pipe dope to work well, I think the stuff I have is PST, made by Locktite... if memory serves me correct.
 
I use teflon tape. My 62 leaked a lot of gear oil from the plug. A little teflon tape on the threads and it never leaked again.
 
Yup. Teflon tape or Hylomar.
 
I use Permatex "Blue" and don't have any problems- that is just what I have on the shelf.
BillM
 
Back
Top