Did this come out of my wiper motor?

[bnw]

I disassembled my wiper motor to repair the wire to the park switch. I put it back together and bench tested it OK. Then I found this on my workbench. https://picasaweb.google.com/treight/Wiper?authkey=Gv1sRgCPuV3KTQk_z_hgE#

New to posting pics. I hope this works.

 

[tdskip]

 

[TR3driver]

(Thanks, Tom)

Doesn't look familiar to me, I think it came from somewhere else.

 

[Mickey Richaud]

Looks kinda like one of those little tools to remove radio units.

 

[MGTF1250Dave]

I agree with Randall, it is not from either the wiper motor internals or the gear box section. This last weekend I helped clean up a Lucas wiper motor and drive and didn't see anything like that.

 

[Banjo]

Oh No! that's the reciprocating dangle arm that operates the bi-lateral canuter valve. if you don't get it situated back in the phase conductor housing, your wipers won't be able to automatically parallel park.

 

[Darwin]

looks like a blanking plate for a computer to me.

 

[ArcticOne]

My wiper motor is a DR3A type (yours is DR2) and I went through all my disassembly photos and see nothing like the part you show.

Hope this helps

jb

 

[Gliderman8]

Gives me the jitters.... I'm just saying

 

[Mickey Richaud]

Gives me the jitters.... I'm just saying

10-4 on the jitters...

...and I ain't "just saying".

 

[bnw]

Looks like I'll get some sleep tonight. Thanks all!

 

[DNK]

X2 here as I have said in the past .Mick you need to talk with the boss about that.