• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Diameter of Washer Bottle Hole in Parcel Tray

Share this page

K

Kainopong

Member
Offline
Can anyone confirm the diameter of the early BN4 washer bottle hole vs the later 6 cylinders? I read that the early ones were slightly larger but have no reference or means to confirm. Thanks!
 
I have reproduced the bracket that holds the bottle and the bottle is about 4 inches in diameter. The bracket is about 4 1/8 inches outside diameter. So the hole should be somewhere between those dimensions. I have one more reproduction bracket left if you are in need.
 
I just measured the the hole in the package tray after I removed my bottle and bracket in my Longbridge BN4 and the opening for the bottle appears to be 4 1/4" wide. I hope that assists you for the information you needed.
:driving:
 
healeyblue said:
I have reproduced the bracket that holds the bottle and the bottle is about 4 inches in diameter. The bracket is about 4 1/8 inches outside diameter. So the hole should be somewhere between those dimensions. I have one more reproduction bracket left if you are in need.
Click to expand...

If you still have that reproduction bracket I want it. Let me know?
Thanks!
Chet
 
Back
Top