• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Diameter of Washer Bottle Hole in Parcel Tray

Share this page

K

Kainopong

Member
Offline
Can anyone confirm the diameter of the early BN4 washer bottle hole vs the later 6 cylinders? I read that the early ones were slightly larger but have no reference or means to confirm. Thanks!
 
I have reproduced the bracket that holds the bottle and the bottle is about 4 inches in diameter. The bracket is about 4 1/8 inches outside diameter. So the hole should be somewhere between those dimensions. I have one more reproduction bracket left if you are in need.
 
I just measured the the hole in the package tray after I removed my bottle and bracket in my Longbridge BN4 and the opening for the bottle appears to be 4 1/4" wide. I hope that assists you for the information you needed.
:driving:
 
healeyblue said:
I have reproduced the bracket that holds the bottle and the bottle is about 4 inches in diameter. The bracket is about 4 1/8 inches outside diameter. So the hole should be somewhere between those dimensions. I have one more reproduction bracket left if you are in need.
Click to expand...

If you still have that reproduction bracket I want it. Let me know?
Thanks!
Chet
 
Back
Top