• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A Defrost vent finish

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
I'm working on small parts until I have a shop and I would like to know what finish the defrost vents originally had? Was it mat black, semigloss, gloss, or wrinkle? I have another load of parts going to the powder coater and his finish would be gloss black.
Thanks, Rut
 
The defroster vents on my '63 TR4 are finished in gloss black enamel.
I believe that was the original finish since the original owner never did any interior work on the car.....

M.
 
Merlin63Tr4 said:
The defroster vents on my '63 TR4 are finished in gloss black enamel.
I believe that was the original finish since the original owner never did any interior work on the car.....

M.
Click to expand...
Thanks, mine are currently finished in rust!
Rut
 
Merlin63Tr4 said:
The defroster vents on my '63 TR4 are finished in gloss black enamel.
I believe that was the original finish since the original owner never did any interior work on the car.....

M.
Click to expand...

Yep...that's what is original as mine were in good condition. I did mine in a semi-gloss as gloss was TOO shiny for me.
 
Back
Top