• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Datsun A15 motor with 5speed tranny in Sprite

Share this page

Hey Rick....I found that fitting you were talking about. Now I remember the machine shop that did the valve job on it this past summer mentioned to me that the fitting was installed crooked, but to leave well enough alone. I can see where that would cause some big problems! :smile:
 
Yeah, if it ain't leakin' then don't touch it!!
That one really made me nervous, fortunately the right tap and it went back in and sealed up. :wink:
 
This is for RickB, there is a manifold on ebay US that lets you put a single sidedraft Weber on your Datsun engine. It has the round ports. It's even located in Oregon. User name is 503webster. Hope this helps. Regards Stefan
 
Thanks - I'll go look for it!!
 
Back
Top