• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

dash lightbulb and flasher [electrical] question

Share this page

JPSmit

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
I have to replace a couple of dash lightbulbs the big and small size - does anyone have a generic part number? I also need a new flasher unit for the signals - can I go generic for this? any part #? Does it have to be grounded against the firewall?

TIA all - we're getting closer
 
Generic units work fine. 3 pins. One pin is supply, another for the turn switch (gets switched to left or right). Third pin for indicator.
A generic 2 pin unit will also work, but no indicator.
A VW 3 pin unit will also work. They're electronic and maintain a constant flashing frequency.

Does not need grounding.
 
A generic 2 pin flasher unit will ok fine. I bought a "Heavy Duty" 2 pin flasher unit from Autozone.
 
I am using 2-pin (electronic) flashers from Tridon available in most parts stores. I have one for the turn signals and one for the hazards (in the Triumph). These are their part EL12. In the Mini I'm using the 3-pin EL13 flasher instead of Lucas. It has worked great for about 5 years.
 
Back
Top