• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Dash Gauge Bezel Removal

Share this page

R

Ray Smith

Jedi Hopeful
Offline
How do you remove the bezels from the dash gauges? Do you rotate the chrome ring and remove, or do you just pry them off. What is the best tool to use to remove them?

Thanks,

Ray
 
[Mamma taught me it's not polite to pry]

Ignore if your gauges appear to differ from the TR gauges...

My bezels rotate off... looking at the back there are tabs that will align with notches in the gauge backing when the bezel is rotated. It may still feel stuck ot that point if there is a very old gasket in there that has stuck to the glass, bezel &/or body of gauge.

To get a better grip to rotate I use one of those rubber jar lid openers. If the gauges have been closed up for a long time the gaskets are possibly shot. I made my own from black gasket paper though replacements are surely available.
 
Geo, I didn't mean to pry buttttt

The gauges appear to be the same as the ones that you are describing. Will use your method and see what happens.

Thanks,

Ray
 
Back
Top