• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Dash Cement

Share this page

KVH

KVH

Obi Wan
Silver
Country flag
Offline
Do most of you recommend contact cement for dash vinyl?

The crash pads, to take one example, have extra material that must be wrapped around the metal dash frame, and I assume a Weldwood Contact Cement would be the way to go.

Any other thoughts?
 
I just finished the dash on my 3A and I used Weldwood Brusable contact cement throughout and was very happy with it. If you are putting it on a painted surface give both pieces at least 30 minutes to dry. The solvent in the cement softened the primer paint on the interior of my dash. A Weldwood tech type recommended the longer drying time.

Good luck to you, Tinkerman
 
Back
Top